| Series | FSR08 |
| Package diameter | |
| Operating Direction | |
| Bushing material | |
| Number of Gangs | |
| Power-linear | |
| Power-audio | |
| Life cycle | 80K |
| Switch Option | Y |
| Detent Option | 16 |
| Mounting | |
| Element | |
| Temperature ppm/℃ | |
| Tolerance | |
| Pulse | |
| Shaft material | |
| Life cycle | |
| Operating type | Rotary |
| Power rating | AC 50V, DC 10 V (1mA) |
| Travel(mm) | |
| Lever length | |
| Turns | |
| Specification | Document download |
Introdution
1.Flux build-up prevention is taken through inserting molding around the element with resin, it's performance is more steady.
2.Long life 80,000 cycles min.
| Electrical characteristics | |
| Contact Resistance | 5Ω Max |
| Rated voltage | DC 5V |
| Rated current | 1mA (2mA at common terminal) |
| Maximum Operating Current | 2 .5mA (5mA at common terminal) |
| Insulation Resistance | More than 100MΩ at DC 250V |
| Withstand Voltage | AC 300V for 1 minute |
| Mechanical characteristics | |
| Total Rotational Angle | 300°±10° |
| Rotational Torque | 20~250gf.cm (0~+70°C);500gf.cm max (0~-20°C) |
| Stopper strength | 3.0Kgf.cm Min |
| Push-Pull Strength | Pull: 3Kgf Max.Push:5Kgf Max for 10sec. |
| Number of Detents | 16 detents |
| Durability | |
| Operating temperature range | -20℃~+70℃ |
| Rotational Life | 50,000 Cycles Min without load |
| Cold test | -30±2℃ for 96H , CR is 200mΩ Max; IR is 100MΩ Min |
| Dry heat for long term | 85±2℃ for 96H,CR is 200mΩ Max; IR is 100MΩ Min |
| Humidity | 40±2℃, 90-95% RH for 96H, CR is 200mΩ Max;IR is 100MΩMin. |
| Temperature cycles | -20℃~+70℃, 5 cycles, CR is 200mΩMax, IR is 100MΩ Min. |
| Soldering Condition | Dip soldering: 260 ±5°for 5Sec.Manual soldering: 350±10°3Sec. Max |
.jpg)
.jpg)
